The fourth generation ipod Nano is a moveable, compact and very innovative media player. Disassembling it enables you to change a failed battery or resolve a loose headphone plug, but it can not be taken apart as totally as other types since of the way the electronics are soldered with each other. All you want is a single instrument obtained from an ipod offer retailer. The method is not difficult, but any guarantee that is in result will be violated.
Points You are going to Require
- Soft cloth ipod opening device Phillips jeweler's screwdriver Flat-edged jeweler's screwdriver
Spot a soft cloth on a table. Lock the electrical power change. Location the Nano deal with down on the cloth, with the LCD display screen farthest from you.
Insert the opening device into the best of the Nano among the scenario and the bezel. Pull the leading bezel off the leading of the tool.
Repeat this process on the bottom and get rid of the bottom bezel.
Eliminate the two screws that are now uncovered on the bottom with the Phillips screwdriver. Insert the suggestion of the flat-edged screwdriver in between the dock module in the bottom and the facet of the Nano.
Raise up on the suggestion to loosen the dock module. Pull the module out of the bottom. Eliminate the screw that is now uncovered at the bottom.
Push the circuit board halfway out of the Nano's situation from the bottom with the suggestion of a screwdriver.
Push the LCD panel and the glass in front of it out of the Nano's situation.
Achieve inside of the situation and grab the cable connected to the click on wheel module. Pull the cable's plug off the circuit board.
Pull the circuit board out of the situation. Location the circuit board on the soft cloth with the electronics dealing with up.
Slide the "Maintain" change tab gently off the leading finish of the circuit board. Push the click on wheel module out of the circumstance.
No comments:
Post a Comment