How Do I Change My 4th Generation iPod Battery?

The battery inside of a 4th generation ipod may possibly supply for a lot more electrical power than earlier types, but it will nevertheless lower within power above time. Modifying the ipod battery for a substitute will allow you use the ipod for more time durations of time involving recharging. The ipod will have to be opened and the unique battery will have to be taken out and changed with an ipod battery from an ipod present keep. The technique does not demand Modifying any digital areas and can be finished in an hour.

Items You may Demand

Soft cloth Utility knife Phillips jeweler's screwdriver Tweezers ipod alternative battery

Set a soft cloth down on a table. Slide the ipod lock at the top rated so that the orange strip is unveiled. Place the ipod down on the soft cloth with the LCD display screen going through up.

Insert the utility knife into the seam in between the white front of the ipod and the back again circumstance. Slide the utility knife down the side of the ipod to release the clips. Repeat this process on the other side of the ipod. Repeat this method on the bottom of the ipod. Raise the front situation of the ipod off of the bottom scenario. Place the front scenario down on the soft cloth with the digital areas dealing with up.

Elevate up on the protective shield lying in of the front circumstance. Use the Phillips jeweler's screwdriver to take away the single screw at the bottom of the front scenario at the appropriate side just under the metal challenging drive.

Eliminate the battery cable at the side of the battery by pulling it off from within the front situation with the tweezers. Wiggle the Phillips jeweler's screwdriver under the battery to pop it up off the front circumstance. Get rid of the battery and dispose of it appropriately.

Insert the battery cable from the substitute battery into the make contact with on the front scenario. Put the substitute battery into place inside of of the front circumstance. Reattach the screw by the side of the metal tough drive. Push the protective shield back again down onto the front circumstance. Reattach the front circumstance to the back again scenario.