The Nano is 1 design from the ipod mp3 player family members developed by Apple. The fourth generation of this product attributes a prolonged slim circumstance and a modest, square touch LCD display screen on the front. All of the internal workings of the ipod are contained in a number of little parts in the situation. If you have a fourth-generation Nano and will need to disassemble it, you can quickly do it by yourself in a reasonably quick sum of time.
Items You may Require
- Guitar decide on Jeweler's Philips screwdriver Jeweler's slotted screwdriver
Pry off the white plastic bezel on the top rated and bottom of the ipod employing a guitar choose. The bezels will unclip from the Nano, so retain your fingers previously mentioned them to end them from flying away from you.
Get the ability change from underneath the leading bezel and set it aside. It will be unsecured to nearly anything the moment the bezel is taken out.
Take away the two tiny screws on the best and the a few on the bottom of the ipod with the Philips screwdriver. Pry off the metal piece on the bottom of the ipod utilizing the suggestion of a jeweler's slotted screwdriver.
Raise the leading metal piece out of the best of the ipod by gently prying it upward. It will Take caught the moment it is approximately a single-fourth inch out of the scenario by the change on the back again of the ipod.
Pull the change on the back again of the ipod away and carry on to pull the contents out of the situation. Quit pulling as soon as you can see the cables inside correct underneath the bottom edge of the LCD display.
Compress the bottom edge of the glass previously mentioned the display into the scenario with your fingers. You may be able to use the flat device to pry the glass off from the best edge and Consider the glass away from the ipod.
Elevate the ribbon wire connecting the decrease-left corner of the display to the within of the ipod. This will disconnect the wire and permit you to cautiously pull the internal components totally out of the scenario.
Slide the flat device in between the battery and the back again of the Nano circumstance to separate them. When the battery is lifted up, you can begin to push it down out the bottom of the situation till the locking cable is visible along the bottom of the battery.
Consider off the locking cable by lifting it up, and make certain no glue is keeping it in location. Slide the battery out the relaxation of the way from the situation.
Slide the flat instrument among the front of the situation and metal backing plate of the clicker wheel to separate them. Push the clicking wheel down by way of the bottom of the scenario.
No comments:
Post a Comment