Ipod screens are simply cracked or scratched if not dealt with meticulously or saved in a protective circumstance. For ipod Nano entrepreneurs who Will need to save time and income by employing their individual ipod restore instrument kits, correcting an ipod Nano screen can be a swift and effortless approach. Correcting the ipod screen also saves the operator the headache of getting a brand name-new ipod.
Items You may Will need
- Modest Philips screwdriver Nylon device Little flat-head screwdriver, knife or T-six Star Driver
Insert the nylon device into the groove found on the prolonged facet of the ipod. Slide it along the edge of equally sides right up until you are capable to separate equally plates.
Put aside the back again plate. Very carefully raise the battery from its slot to entry the screws beneath (do not minimize the battery wires if you are not changing the battery). Peel back again the protective movie covering the major board and use the Philips screwdriver to take away the a few Little screws surrounding the primary board.
Use the flat-head screwdriver to pry open the primary board about one/4 inch. Separate the screen from the major board by shifting the keeping clips away from the board.
Slide the screen out so that a portion is sticking out the top rated of the ipod. Flip the ipod on its back again and eliminate the faceplate. Consider out the ipod screen by flipping up the black tab keeping down the ribbon cable connector. Consider out the present connector and exchange it with the new screen ribbon by locking down the black tab.
Insert the new ipod screen by putting it on the principal board. Area the principal board back again into the ipod plate and substitute the 3 screws to lock it in Location. Put the battery back again into its authentic place.
Verify to make positive that the plate's metal tabs are pushed down. Slide the ipod's maintain button so that it is aligned with the plate's grooves. Shut both plates with each other.
No comments:
Post a Comment