Modifying the battery in the 1st generation ipod Shuffle can be challenging. Not only does this model of the ipod has a shell which is tough to crack without having harmful it, the battery is soldered onto the method board. The trick to disassembling the system is to separate the USB connector from the relaxation of it and push the internal parts out of it. You are going to have to perform by means of a good deal of glue to do that, but you can get it completed and change your battery.
Points You are going to Want
- Alternative battery Tiny flat-head screwdriver or box cutter Plastic scribe Soldering iron Wire cutters Super Glue
Flip off the ipod Shuffle.
Get rid of the cover from the USB stop of the ipod Shuffle.
Insert a Tiny flat-head screwdriver or the suggestion of a Modest box cutter into the groove close to the edge of the USB connector. Gently perform your way close to the groove until finally you have cut by means of all the glue.
Pull the USB connector out of the ipod Shuffle. A element board will arrive out with it, so do not pull it as well tough.
Insert the flat-head screwdriver or box cutter beneath the energy change and gently pry it off the ipod Shuffle.
Insert a plastic scribe or a ballpoint pen into the audio connector at the bottom of the ipod Shuffle and push the internal parts out of the system.
Pull the USB connector. The relaxation of the parts will arrive out.
Clip the wires that operate from the battery to the method board. This will totally free the battery from the ipod Shuffle.
Solder the ends of the cables of the Alternative battery to the technique board and permit the soldering to solidify.
Place the ipod Shuffle's internal elements back again within the situation.
Use Super Glue to the groove all around the USB connector and change the ability change. The ipod Shuffle is now prepared for Utilize.
No comments:
Post a Comment