Repair a Clicking iPod Nano

The ipod Nano is a really common songs player, but since it is so tiny, the click wheel that is employed to navigate the menus can commence to click instead than spin freely. This will at some point wreck the click wheel and make the ipod Nano unusable. Changing the click wheel oneself is not a informal process; you need to open up the ipod Nano, but it will preserve you the higher expense of taking it into a services middle. The click wheel and opening device can be obtained from an ipod provide store. Changing the click wheel does not call for digital information.

Points You are going to Call for

Soft cloth ipod Nano click wheel ipod opening instrument Jeweler's screwdriver Spudger

Set a soft cloth down on a table. Flip on the ipod Nano and Set it down on the soft cloth experience up. Depart the ipod Nano on right up until the battery has fully drained.

Decide on up the ipod Nano and maintain it in your left hand with the "Maintain" change going through up. Move the "Maintain" change so that the orange indicator displays the ipod Nano is in the locked placement.

Decide on up the ipod opening device in your appropriate hand. Insert the ipod opening instrument in the seam involving the white plastic top rated and the metal casing of the ipod Nano. Pry off the white bezel and Set it aside.

Pry off the bottom bezel of the ipod Nano employing the ipod opening instrument in the identical way as the top rated bezel was taken out. Set the bottom bezel aside.

Use the jeweler's screwdriver to take away the two screws from possibly side of the dock connector on the ipod Nano's bottom. Place the screws aside. Use the jeweler's screwdriver to take away the two screws from the top rated of the ipod Nano. Place the screws aside.

Pry the headphone jack partly out from the ipod Nano employing the spudger. Take away the now uncovered screw under the headphone jack with the jeweler's screwdriver. Place the screw aside.

Take off the metal bracket that is all around the dock connector. Set the metal bracket aside. Meticulously disconnect the headphone and click wheel cable from within of the dock connector by wiggling it free in the direction of the front of the ipod Nano with the spudger.

Push the logic board up and out of the ipod Nano's casing from the bottom employing the spudger. Put the logic board onto the soft cloth experience up.

Decide on up the ipod Nano casing in your left hand. Gently push the click wheel out of the hole in the ipod Nano. Discard the click wheel. Insert a new click wheel into the maintain of the ipod Nano from the within of the casing. Wiggle the click wheel right up until it seats by itself into the casing.

Reassemble the ipod Nano. Cost the ipod Nano. Flip off the "Maintain" change and Flip the ipod Nano on. You need to be able to use the click wheel to navigate via the menus without having creating a clicking noise.